Undernet serverinini botlarinin komutlari(W ve X)

Undernet serverinda 2 tane bot vardir..W ve X....Bizim kanalimizdaki bot W'dur..Bot 24 saat kanalda duran bir makinadir..Isterseni kendi botunuzu alabilirsiniz ama bunun için ayda 24$ lari gözden çikarmaniz lazim...Uzun lafin kisasi biz size undernet server botlarinin komutlarini verecegiz...Bundan sonra botlar niye konu$muyo demezsiniz artik ::)))

X and W Commands List



Sections

Level 500 commands - Channel Manager
Level 450 commands - Trusted Channel Admin
Level 400 commands - Userlist Admin
Level 200 commands - Userlist Op
Level 100 commands - Channel Op
Level 75 commands - New Channel Op
Level 50 commands - Channel Regular
Level 1 commands - Minimum Access
Level 0 commands - Everyone else





Level 500 : Channel Manager



SET : Changes special X/W modes for channel. After making any change to SET commands or channel
modes, you must use the ADDCHAN command Level 450 commands for X or W to remember the channels
defaults.

/msg X,W SET #channel <variable> <value>


Variables for SET

NoOp : This means that nobody may be a Channel Operator except X/W. This does not mean you don't have
control of X/W or the channel. If you are authenticated, you can issue commands like kick, ban, etc. through
X/W, you just can't be Op'd yourself.

/msg x,w SET #channel NOOP ON
/msg x,w SET #channel NOOP OFF


OpOnly : This command disables all of X/W's commands except Op. This does NOT prevent someone
holding ops in the channel from excersing any of the Op commands themselves.

/msg x,w SET #channel OPONLY ON
/msg x,w SET #channel OPONLY OFF

StrictOp : This allows only Level 100+ Users who are Authenticated to be Op'd.

/msg x,w SET #channel STRICTOP ON
/msg x,w SET #channel STRICTOP OFF



Level 450 : Trusted Channel Admin.



SET : Changes special X/W modes for channel. After making any change to SET commands or channel
modes, you must use the ADDCHAN command (Level 450) so that W/X remembers the new channels
defaults.



Variables for SET

AlwaysOp : This variable insures that X/W will always have Ops. Note: By default this variable is set to ON
and generally speaking should not be modified.

/msg x,w SET #channel ALWAYSOP ON
/msg x,w SET #channel ALWAYSOP OFF

When setting the MassDeopPro, NickFloodPro, and FlooPro, value can be set from 1, which is the most
sensitive to 10; which is least sensitive. A value of 0 turns off the option.

MassDeopPro : The maximum number of deops X will allow in a 15 sec period. Any user exceeding this
will be DeOped and Suspended

/msg x,w SET #channel MASSDEOPPRO value

NickFloodPro : The maximum number of nick changes that can be done in the channel in a 15 sec period.
Any user exceeding this number will be kicked from the channel and suspended (if on the userlist). NOTE :
The .noclones patch makes this variable obsolete, since it will not allow rapid nick changes.

/msg x,w SET #channel NICKFLOODPRO value

FloodPro : The maximum number of KICKs, TOPIC CHANGES and such that can be sent to the channel
in a 15 second period. Any user exceeding this limit will be kicked and suspended (if on the userlist). NOTE :
This does NOT work against normal channel dialogue, since X/W are +d (deaf) to all channel text.

/msg x,w SET #channel FLOODPRO value

UserFlags : Determines whether or not AUTOOP will automatically be set to ON or OFF when a new user
is added to the Userlist. Default value is 0 (OFF). NOTE: Once a user is on the Userlist, the AUTOOP
command can be issued to change the value for that individual alone. (see AUTOOP Level 400).

0 = AUTOOP OFF for new users
1 = AUTOOP ON for new users



/msg x,w SET #channel USERFLAGS 0
/msg x,w SET #channel USERFLAGS 1

Lang : Changes default language for the channel.

en (English)
es (Español)
nl (Nederlands)
fr (Français)
ge (Deutsch)
/msg x,w SET #channel LANG value



Description : Sets the default channel topic. Maximum of 80 charcters. This does NOT affect the actual
channel topic, unless autotopic is on. The topic can be seen only in the chaninfo, or on the webpage.

/msg x,w SET #channel DESCRIPTION value

URL : You can state your channel homepage address with this option (maximum characters including
Description is 80 characters). This does NOT affect the channel topic, unless AUTOTOPIC is ON (Level
450). The description can be seen only by using the CHANINFO command (Level 0), or on the webpage.

/msg x,w SET #channel URL value

AutoTopic : This flag makes X or W reset the topic to the channel URL and Description every 30 minutes.
Note that if the channel is idle, the topic will not be reset during that time.

/msg x,w SET #channel AUTOTOPIC on
/msg x,w SET #channel AUTOTOPIC off

JOIN : Tells X/W to join your channel. You must use the ADDCHAN command (Level 450) so that W/X
remembers to rejoin the channel after netsplits.

/msg X,W join #channel

PART : Tells X/W to part your channel.

/msg X,W part #channel

ADDCHAN : X/W Auto Rejoin & Maintain Channel Defaults. This command must be issued after any
changes are made to the channel defaults or the changes will be lost should a netsplit occur.

/msg X,W addchan #channel

REMCHAN : Remove X/W from the AutoJoin Database and clear any channel defaults. This command has
the opposite effect of the ADDCHAN command. You will need to make X/W join if it ever leaves and it will
not maintain any modes. NOTE: This command does NOT purge your channel.



/msg x,w remchan #channel



Level 400 : Userlist Admin



ADDUSER : Adds a user to the channel's Userlist. Password is Mandatory. Don't use your password. Use a
password you choose (the User can always change it after being Added) or use one the User provides to you.
NOTE: If the User is online, just use the Nick but if the User is offline, use Nick and *!*userid@*.host You
cannot AddUser someone with equal or higher access than your own.



AddUser for X - /msg [email protected] ADDUSER #channel nick level password
OR if the user is not online- /msg [email protected] ADDUSER #channel nick
*!*userid@*.host level password

AddUser for W - /msg [email protected] ADDUSER #channel nick level password
OR if the user is not online- /msg [email protected] ADDUSER #channel nick
*!*userid@*.host level password

CLEARMODE : Clears all channel modes. Can be used when your channel has been locked up. (SET +i or
+k without your knowledge) NOTE: The best option to gain access to your channel when it has been locked up
is as follows:

Authenticate; Type /msg x (or w) status #chan to see the key;
If the channel is +k but not +i Join your channel, Type /join #chan KeyHere
If the channel is +i Invite yourself, Type /msg x (or w) invite #chan nick
then Join your channel, Type /join #chan KeyHere (if Keyed)

/msg X,W clearmode #channel

MODINFO : The folllowing commands can be used to make changes to existing users in a channel's Userlist.
All commands require the nick recorded in the Userlist, not necessarily the nick that they are online with at the
time the command is issued.

Variables for Modinfo

Access : Changes the access level of a user. Access level can be set between 1 and one less than your
own level (if you have an access level of 400, you may assign a level of up to 399 to other users).

/msg x,w MODINFO #channel ACCESS nick newlevel
AutoOp : Changes autoop from ON to OFF. Autoop means that X/W will op an authenticated user
when they enter the channel.

/msg x,w MODINFO #channel AUTOP nick ON
/msg x,w MODINFO #channel AUTOOP nick OFF
Match : Changes the user@host for a user in X/W's database. Useful if a user on your channel has
changed ISP. See How To Make A User@host for instructions on how to create a correct userhost.
Userhosts such as *!*@*.host or *!*userid@* are NOT acceptable.

/msg X,W modinfo #channel MATCH nick *!*user@*.host.com


NewPass : Permits an autheticated user with higher access to change a password of a user should a
password be forgotten.

/msg x,w MODINFO #channel NEWPASS nick newpasswordhere

REMUSER : Removes a user from the channel database. You must have higher access than the user you
want to remove.
/msg x,w REMUSER #channel nick

STATUS : Displays all special X/W modes, Channel modes and the number of users in your channel. Neat huh
:)

/msg x,w STATUS #channel



Level 200 : Userlist Op



CLEARBANLIST : This command works only for expired bans and does not clear the X or W banlist.

/msg x or w clearbanlist #channel

MASS KICK : This should be a seldom used command. Use should be limited to extreme channel flooding or
clones.

/msg x,w kick #channel *!*user@*.host reason (optional)



Level 100 : Channel Operator



DEOP : Deops one or more persons in you channel. (Keep in mind the limit that may be in effect with
MASSDEOPPRO (see MASSDEOPPRO level 450)

/msg X,W deop #channel <nick1> [nick2] [nick3]

INVITE : Has X or W invite someone in your channel.

/msg X,W invite #channel <nick>

OP : Ops one or more persons in your channel

/msg X,W op #channel <nick1> [nick2] [nick3]

SUSPEND : Suspends a users access to X/W for the specified period of time. Time: S = seconds , M =
minutes, H = hours or D = days. You can only suspend someone with access lower than yours.

/msg X,W suspend #channel nick or (user@host) 10 M

suspends a user for 10 minutes UNSUSPEND : Unsuspends a user on your access list.

/msg X,W UNSUSPEND #channel nick



Level 75 : New Channel Operator



BAN : The ban command adds a specific userid@host to the X/W banlist for up to 336 hours (2 weeks). You
may place a ban on a nick if the person is online or ban the userid@host if the person is not online. The ban
level can range from 1 to your own level. Ban level 20 - 74 prevents the user from having ops. Ban levels
above 75 prevent the user from being in the channel at all.

/msg X,W BAN #channel nick [duration in hours] [level] [reason] if the user is online
/msg X,W BAN #channel *!*userid@*.host [duration in hours] [level] [reason] if the user is not
online

UNBAN : Removes a userid@*host from the W/X banlist for a channel. You must at least have the same
access level as the level of the ban to remove it.



/msg X,W unban #channel <nick|user@host> if the user is not online
/msg X,W UNBAN #channel nick if the nick is online and the nick's userid@host matches that of the
ban



Level 50 : Channel Regular



KICK : Tells X/W to kick somone from your channel, reason is optional. Your nick will be placed in the kick
msg.



/msg X,W kick #channel <nick> [reason]

TOPIC : Has X/W change the topic in your channel. NOTE: If a Description has been set and AutoTopic is
ON, this topic will be overwritten in 30 minutes unless the channel is idle.



/msg X,W topic #channel newtopic



Level 1 : Minimum Access



STATUS : This does the same thing as level 400 status EXCEPT, it will not report channel modes (+nt ect) to
anyone with access below 400.



/msg X,W status #channel

LOGIN : This loads your access listing into memory and authenticates you on your channel. Note : "LOGIN"
and "PASS" are interchangeable in this command.



Login X : /msg [email protected] login #channel password
Login W : /msg [email protected] login #channel password

DEAUTH : If you have sent your password already and would like to deauthenticate yourself. Use this
command.



/msg X,W DEAUTH #channel

NEWPASS : Permits a user to change their own password. User must be authenticated with the old password
before the command can be issued to change to the new password.

For X : /msg [email protected] NEWPASS #channel newpasswordhere
For W : /msg [email protected] NEWPASS #channel newpasswordhere

PASS : See LOGIN (Level 1)



Level 0 : Everyone else



ACCESS : Can look up the access for a certain person or a string. Example : /msg X,W access #channel
*!*@*.aol.com , would return all AOL users with access on that channel. Use /msg x,w access #channel * to
see all users if there are less than 15 entries in the channel. If more than 15, go to http://cservice.undernet.org
and click on Userlist. Also you can use these options instead of a nick or string.

Access options

nick - shows the access level of a single user

/msg x,w ACCESS #channel NICK
-min level - show only users above the given level

/msg x,w ACCESS #channel -MIN level
-max level - show only users below the given level

/msg x,w ACCESS #channel -MAX level
-autoop - Show only users with autoop on.

/msg x,w ACCESSS #channel -AUTOOP
-noautoop - Show only users with autoop off.

/msg x,w ACCESS #channel -NOAUTOOP
-modif - Shows who last modified the access listing

/msg x,w ACCESS #channel -MODIF

Access Flags : - output of access command

-X- USER: Blahguy- (*!*username@*.blah.com) ACCESS: 1 LMPU
-X- CHANNEL: #foochan -- AUTOOP: ON


L = Loaded in memory, An access remains listed in memory for 90 minutes after you log off.
M = Modified, but not saved to disk, database is autosaved every 90 minutes.
P = Has a password.
U = User is currently authenticated.

BANLIST : Shows the channel banlist. You must be in the channel to use this command.



/msg X,W banlist #channel

CHANINFO: Displays whether or not a channel is registered, and to whom.



/msg X,W chaninfo #channel

HELP : Displays help file on a given command.



/msg X,W help [command]

LBANLIST : Searches X/W's banlist for a certain string. Use * to see the whole list.



LBanlist : /msg X,W LBANLIST #channel to find a specific ban; OR /msg X,W LBANLIST #channel *
to see up to 15 bans

LOGIN : This loads your access listing into memory and authenticates you on your channel. Note : Exact same
as pass



Login X : /msg [email protected] login #channel password
Login W : /msg [email protected] login #channel password

MAP : Shows a map of connected servers.



Map : /msg X,W map

MOTD : Displays X/W's message of the day.



Message of the Day : /msg x,w motd

SHOWCOMMANDS : Shows all commands you can use on a channel with your access level.



/msg X,W showcommands #channel

SHOWIGNORE : Shows X/W's ignore list. This is what happens when someone tries to or accidentally floods
X/W. The time length is 60 minutes.



/msg X,W showignore

VERIFY : Displays whether or not a person is an official cservice representative, helper or an IRC Operator.
If X/W answers that the person is "NOT an authenticated CSERVICE representative" please come to
#cservice and ask about them.



Verify : /msg X,W verify nick


This page last updated on April 23, 1999
Review updates and corrections by Gentle1` and SaraK
E-mail [email protected] with any suggestions or comments